Versatile, Easy To Install
 CPI offers the reliable, versatile Push 'N Turn line of universal repair fittings. This system has proven dependability after 15 years of service in the most demanding potable water conditions.

Push 'N Turn fittings are almost universal - they can be connected to most hot and cold potable water systems in North America

USE FOR:  

*Cross Linked Polyethylene (PEX)
*Copper Type "M" or "L"
*CPVC

*Polybutylene
*High Density Polyehtylene
*Adapts to Iron Pipe Threads


Mark pipe 1 1/4" from end (or 1 3/4" for the 3/4" fitting)
Push Fitting into Pipe to the mark

Turn nut clockwise until hand tight

Tighten nut with wrench
1 1/2 Turns for PEX, CPVC & Copper
2 1/2 Turns for Polybutylene

Push 'N Turn Components
 1 Pipe
Can be any pipe with controlled outside dimension: PEX, Copper, CPVC, Polybutylene etc
2 Compression Nut
The nut tightens the locking ring against the pipe using the compression sleeve as leverage
3 Stainless Steel Gripper
The gripper prevents the pipe from slipping out of the fitting once inserted. It is one time usage and must be replace to reuse the fitting
4 Compression Sleeve (Ferrule)
The compression sleeve forms the seal around the pipe
5 Fitting Body
The threaded portion of the fitting which accepts the nut
6 Full Flow Design
When properly assembled, the fitting creates no obstruction to flow
BACK